Removing
1. Squeeze the latches (A) on both sides of the air cleaner cover (1) towards the inside (IN).
2. Pull the air cleaner cover forward (WITH) and take it off (see fig.).
3. Remove the filter element (1) and holder (2) assembled from the air cleaner housing (see fig.).
4. Remove the filter element holder.
Clean the air cleaner element or replace it at the recommended intervals or more frequently if the vehicle is operated in dusty conditions. See chapter General information and maintenance.
Blow through the air cleaner element with compressed air from the back until all dirt is removed.
Installation
Installation is in the reverse order of removal, bearing in mind the following: Install the air cleaner cover (1) in the direction shown in the figure.
2. Air cleaner element
3. Holder