Washer nozzle adjustment
This model uses non-adjustable washer nozzles.
If necessary, make sure that the jet of washing liquid covers the area shown in the figure.
H1: 320mm
H2: 115 mm
H3: 160 mm
H4: 315 mm
Note: The illustration shows a left hand drive model; the location on the right-hand drive model is symmetrically opposite.
If this is not enough, check that the washer jets are correctly installed on the hood grille cover and/or that the hood grille cover is correctly installed on the body.
If they are installed correctly, but the liquid does not get beyond the specified area, replace them with new ones.
Caution: Do not attempt to adjust the washer jet (1) with a needle, otherwise the nozzle may be damaged.
