1. Luggage compartment floor cover (rear); 2. Luggage compartment floor cover (anterior); 3. Rear overlay of the opening of the luggage compartment; 4. Floor covering of the luggage compartment; 5. Plafond lighting luggage compartment; 6. Rope hook; 7. Plug; 8. Side trim luggage compartment; 9. Mask; 10. Hook
Removing
Side trim luggage compartment
1. Remove the rear luggage rack. See section «Finishing the rear shelf for small luggage».
2. Remove the cover in the floor of the luggage compartment (anterior and posterior).
3. Remove a floor covering of a luggage compartment.
4. Remove a back overlay of a luggage compartment.
5. Remove the cigarette lighter (if available) and disconnect the electrical connector.
6. Remove a plafond of illumination of a luggage compartment. See chapter electrical equipment.
7. Take out a cap and turn out the bolts fastening lateral furnish of a luggage compartment to the internal panel of a back wing.
8. Remove hook and rope hook.
9. Remove the plastic clips securing the luggage compartment side trim to the rear fender inner panel.
10. Remove the metal clips securing the luggage compartment side trim to the rear fender inner panel.
11. Separate lateral furnish of a luggage compartment from facing of a back rack.
12. Remove the side trim of the luggage compartment.
Rear luggage compartment trim
1. Remove the trim for the rear shelf and for small luggage.
2. Remove the cover in the floor of the luggage compartment (anterior and posterior).
3. Partially remove the rear door seal.
4. Remove the side trim of the luggage compartment.
5. Remove a back overlay of an aperture of a luggage compartment.
Installation
Installation is carried out in the reverse order of removal.