Car engine cooling system Nissan Micra 3 (K12)

Engine Cooling, Heating and Ventilation Specifications
Specifications Type and volume of coolant cm. Specifications A/C system coolant HFC-134A (R-134a) Amount of refrigerant, g 450÷500 Compressor oil K/V Nissan A/C System...

General information and precautions
Engine cooling system diagram The engine cooling system works according to the following algorithm. Until the engine is warm, the coolant (coolant) is pumped by a...

Removal and installation of a radiator and fan assembly
Components for fastening the radiator and fan of models with AT and K / V, as well as all models without K / V 1 - Assembly of the fan; 2, 13, 16 - Hose clamp; 3 - Upper...

Disassembly and assembly of the radiator fan
Assembling the fan models with АТ and К/В 1 - Resistor; 2 - Casing; 3 - E / motor; 4 - Impeller Assembling the fan of models without A/C 1 - Casing; 2 - E / motor; 3 -...

Removal, check and installation of the thermostat
Thermostat Installation Components 1 - Thermostat; 2 - O-ring; 3 - Drainpipe; 4 - Upper radiator hose; 5 - heater hose; 6 - Heater tube; 7 - Copper washer; 8 - ECT...

Removal and installation of the water pump
Note. The water pump cannot be disassembled and repaired. Replace the pump assembly if necessary. Water pump installation components 1 - Water pump pulley; 2 - Water...