Note. Not all models are equipped with a sunroof.
The electric drive of the roof hatch works when the ignition is on, a switch located in the upper console is used to control it.
If you press and hold the rear end of the switch in this position, the sunroof will lift and stop. Pressing the rear end of the switch again will move the sunroof cover back.
To close the sunroof, press and hold the front edge of the switch. The sunroof will move forward and stop in the raised position. Release and press the front edge of the switch again to close the sunroof fully.
When the sunroof is opened, the sunblind automatically opens. However, you can close and open the shutter manually.
If the e / drive of the hatch cover fails, to open it, proceed in the following sequence.
1. Turn the ignition key to position «OFF» and carefully remove the overhead console trim. This will open access to the end of the shaft of the e / motor for the drive of the top hatch cover. Then insert a bar wrench into the socket at the end of the shaft and turn the shaft clockwise/counterclockwise to close/open the sunroof.