The layout of the nozzles and hose laying
1. To remove the washer jet windshield open the hood and, pressing on the nozzle from the side of the sprayer, turn and remove it. Disconnect the hose from the nozzle.
2. To remove the tailgate glass washer nozzle, remove the high-level brake light (see Section Removal, installation and adjustment of lighting fixtures), disconnect the hose from the nozzle and squeeze it out of the door by squeezing the tabs of the latch.
3. Make sure air is only flowing away from the hose. Otherwise, replace the nozzle.
4. Installation is carried out in the reverse order of removal. Finally, adjust the nozzles (see Section Windscreen washer adjustment).