Windshield wipers
1. Open the hood, raise the wiper arm and remove the arm nut cover.
2. Give a nut and remove the lever, at first from outside the driver, then - from outside the forward passenger.
3. Before installation, clean the landing splines of the lever.
4. Align the levers in accordance with the illustration and tighten their fixing nuts with force 20.6÷26.5 Nm (A, B - 33.7÷48.7 mm).
5. Moisten the windshield and turn on the wipers.
6. Make sure the wipers stop at the position shown in the illustration above.
Tailgate glass cleaner
1. Raise the wiper arm and remove the arm nut cover.
2. Give a nut and remove the lever.
3. Before installation, clean the landing splines of the lever.
4. Align the lever in accordance with the illustration and tighten its fixing nut with force 10.8÷13.2 Nm (A - 25.5÷40.5 mm).
5. Moisten the windshield and turn on the wiper. Make sure the wiper stops in the position shown in the illustration.