Storage tank
1. Remove the reservoir cap and push down on the filler neck to separate it from the upper radiator support beam.
2. Remove the locker and disconnect the pump wiring connector.
3. Turn out bolts of fastening of the tank, disconnect hoses from it and remove the tank.
4. Installation is carried out in the reverse order.
Pump
1. Remove the locker and disconnect the pump wiring connector
1 — a washer hose of glass of a door of a back
2. Disconnect the hoses from the pump.
3. Pull the pump off the reservoir in the direction shown in the illustration above.
4. Installation is carried out in the reverse order.