Front seat installation components
1 - Headrest; 2/3 - Free / fixing headrest holder; 4 - Back; 5 - Side airbag unit; 6 - Internal reinforcement; 7 - back frame; 8 - Plastic sleeve; 9 - Tilt adjuster; 10/14 - Outer/inner seat trim panel; 11 - Inner cover; 12 - Spring; 13 - Assembling the seat rails; 15 - Lever for adjusting the lumbar support; 16 - Lever for adjusting the position of the seat; 17 - Bracket lever 16; 18 - Seat cushion; 19 - Pillow frame; 20/21 - Inner / outer cover of the front leg of the seat; 22/23 - Inner/outer rear leg cover
1. To prevent the side airbag from deploying, turn off the ignition, then disconnect first the negative, then the positive wire from the battery. Insulate the negative battery terminal and wait at least 3 minutes before starting work.
2. Disconnect the connectors of the side airbag unit (with appropriate equipment) and seat belt tensioner.
3. Remove the seat leg covers by releasing them from the latches
4. Turn out 4 bolts and remove assemblage of a seat from the car.