Side doors
Side door trim components
1/3 - Power window control switch panel in the front / rear door; 2 - Panel of the internal handle; 4/5 - Front/rear door trim panel
1. Fully lower the door glass.
2. Pull the inner handle and release its edging from the latches.
3. Pull the trim back and remove it.
4. Pry off the power window control switch panel with a screwdriver, remove the switches, disconnect their connectors and remove the panel.
5. Turn out screws of fastening of the panel of furnish of a door and release the panel from clamps.
6. Remove the door trim panel.
7. Installation is carried out in the reverse order. Use new clamps and make sure that the panels are firmly attached to them.
Tailgate
1. Release from clips of the panel of finishing of a door of a back.
2. Remove the door trim panel.
3. Installation is carried out in the reverse order. Use new clamps and make sure that the panel is firmly held on them.