Continuously variable transmission (variator) of car Nissan X-Trail 2 (T31)
On-car service CVT fluid Checking CVT fluid The fluid level should be checked after it has warmed up to 50-80°C. Check the fluid level as follows: 1. Check for fluid leaks. 2. After...
Checking with a stationary vehicle Test procedure with vehicle stationary 1. Check the engine oil level. Top up if necessary. 2. Drive the car for about 10 minutes and warm up the CVT fluid to 50-80°C....
Checking the pressure in the main line The location of the main line pressure test hole is shown below. Main Line Pressure Check Procedure 1. Check the engine oil level and add if necessary. 2. Drive the car...
Road test Description The purpose of this test is to determine the general performance characteristics of the CVT and to analyze the causes of malfunctions. The road test includes...
Checking CVT Position In sport mode 1. Move the selector lever to position «R» and turn the ignition key to position «ON» (without starting the engine). 2. Make sure that when you press the...
Technical data and specifications General information Applies to model MR20DE QR25DE 4WD Model CVT RE0F10A CVT assembly Model code number 1XF0E 1ХF8A Gear ratio range «D» 2,349-0,394 reverse 1,750 Ch....