Clutch pedal 1. Clutch pedal assembly; 2. Clutch switch (if available); 3. Clamp; 4. Cruise control clutch switch (on models with cruise control); 5. Pedal block; 6. Restrictor cushion.
Removal and installation
Removal
1. Remove the front door inner trim and lower instrument panel trim. See chapter «Interior and exterior equipment».
2. Remove the lower section of the driver's side instrument panel. See chapter «Interior and exterior equipment».
3. Disconnect the connector from the cruise control clutch switch and remove the wiring clip from the clutch pedal (on models with cruise control).
4. Disconnect the connector from the clutch switch (if available).
5. Disconnect the master cylinder rod end from the clutch pedal.
6. Remove the clutch pedal assembly.
Installation
- Installation is carried out in the reverse order of removal.
Check after removal
Check the clutch pedal for bending, damage, and cracks in the weld areas. If necessary, replace the clutch pedal.