1. Check for fluid leaks.
2. After warming up the engine, drive the car in the urban cycle.
- At an ambient temperature of 20°C, it takes about 10 minutes to warm up the CVT fluid to 50-80°C.
3. Stop the car on level ground.
4. Set the parking brake securely.
5. While the engine is running at speed, press the brake pedal and move the selector lever through all ranges.
6. Remove the dipstick from the CVT fluid filler pipe. To do this, press the lock on the dipstick and unlock the dipstick.
7. Wipe off the fluid from the dipstick. Insert the dipstick by rotating it 180°from its original position until it touches the top of the CVT fluid filler pipe.
Attention. Always wipe CVT fluid away from the dipstick with lint-free paper, not a rag.
8. Move the selector lever to position «R» or «N» and make sure the fluid level is within normal limits.
Attention. When putting the dipstick in place, insert it into the CVT fluid filler pipe and rotate it to its original position so that it is securely seated.