2. Screw the plug into the oil pan drain hole.
Attention. Do not reuse the gasket.
Drain plug - tightening torque: See chapter "Continuously Variable Automatic Transmission (CVT)".
3. Fill fluids through the CVT fluid filler pipe to the required level.
4. After warming up the engine, drive the car in the city cycle. At an ambient temperature of 20°C, it takes about 10 minutes to warm up the CVT fluid to 50-80°C.
5. Check the level and condition of the CVT fluid.
6. If the CVT fluid is contaminated, perform steps 1-5 again.
CVT fluid: See chapter "Continuously Variable Automatic Transmission (CVT)".
Refill capacity. See chapter "Continuously Variable Automatic Transmission (CVT)".
Attention:
- Use only genuine NISSAN CVT NS-2 fluid. Do not mix with other brands of liquids.
- The use of CVT fluid other than NISSAN CVT NS-2 may adversely affect the performance and life of the CVT and will not be covered under warranty.
- When adding CVT fluid, be careful not to spill it on heat-generating components such as the exhaust system.
- Shake the CVT fluid container before refilling.
- After replacing the CVT fluid, erase the date of the previous filling using the CONSULT-III tester.