Rear window wiper control
- If the control lever is set to the position (1), the purifier will switch to intermittent operation.
- Position (2) The rear window wiper lever corresponds to a low frequency of blade strokes.
- If snow or ice interferes with the rear window wiper operation, the wiper may stop operating to protect the rear window wiper motor from burning out. If this happens, turn the switch to the OFF position and remove snow or ice from the wiper blades and the adjacent glass surface. The purifier can be resumed after approximately 1 minute by turning the switch to the ON position.
Rear window washer control
- To turn on the rear window washer, press the lever away from you (3) and hold it until the desired amount of liquid is applied to the glass. After this, the windshield wiper will automatically make several sweeps of the blades.