Mobile phones with BLUETOOTH® function
- In order for your mobile phone to be used with the Bluetooth® audio function, you must first set up your mobile phone (see below). After setting the mode "hands free" automatically turns on on registered mobile phones via the Bluetooth® function when the phone comes within range of this function.
- When a mobile phone is connected, an incoming call is detected and an outgoing call is made, a message appears on the audio system display.
- During an active call, the audio system microphone (mounted on the ceiling in front of the interior rearview mirror) and control buttons on the steering wheel provide mobile communication «hands-free».
- If the audio system was working before the call began (receiving a radio broadcast or playing a CD), the sound is muted until the end of the telephone conversation.
- If the Bluetooth® system cannot establish a connection with your mobile phone, this may be due to the following reasons:
The mobile phone is too far from the car.
The Bluetooth® mode of your mobile phone is not activated. Your mobile phone is not registered with the Bluetooth® audio system.
Your mobile phone does not support Bluetooth® functionality (BT Core v1.2, Hands Free Profile v1.0 and Object Push Profile v1.0).
Mobile phone setup «HANDS-FREE»
1. Phone control button; 2. Phone book call button; 3. End call and return button (BACK).
Action | Display messages |
Briefly press the MENU button | |
↓ | PHONE SETUP (phone settings) |
Press the ENTER button | |
↓ | |
Turn the handle "menu/vdl" | PAIR PHONE (phone connection) |
↓ | |
Press the ENTER button | READYTD PAIR PASSCODE=1234 (ready to connect, code 1234) |
↓ | |
Setting up your mobile phone: Select device «MY CAR», then enter code 1234 | |
↓ | |
Upon successful entry | PAIRING OK (successful connection) |
↓ | CONNECT OK (successful communication) |
Mobile 1*1 | |
PAIR PHONE (phone connection) | |
Consistently press the button to exit to the main menu |
*1 Name of mobile communication device.
- You can register up to 5 different Bluetooth®-enabled mobile phones. However, you can only use one phone at a time. If you have already registered 5 different mobile phones with Bluetooth® functionality, the new mobile phone can only replace one of the previously registered ones. To delete a previously registered phone, use the DEL PHONE function (deleting phone).
You can choose the following options:
- Paired list (list of connected devices).
- Pair phone (connect your phone).
- Delete phone (delete phone).
- Bluetooth® connection (Bluetooth® connection).
- Delete phone book (deleting phone book).
Device connection procedure:
If you want to establish a connection to the system «Bluetooth®» for the first time, it is necessary to carry out the approval procedure in accordance with the procedure indicated below:
1. Turn the ignition switch to the ACC position.
2. Turn on the audio system and your mobile phone.
In the car:
1. Briefly press the MENU button.
2. Press the ENTER button.
3. Rotate the MENU/VOL knob until PAIR PHDNE is selected, then press the ENTER button.
4. The display will show READY TO PAIR (ready to connect), and then the inscription "PASSCODE=1234" (code = 1234).
On mobile phone
1. Turn on Bluetooth® connectivity.
2. Turn on the search mode for equipment that supports the Bluetooth function. For more details, please refer to the instruction manual of your mobile phone. If a device is detected in search mode, this will be displayed on the display of your mobile phone.
3. Select the device called MY CAR (my car).
4. Enter the code 1234 shown on the audio system display using the keypad of your mobile phone, and then press the confirmation key on your mobile phone
Once the connection is complete, the audio system will automatically register the mobile phone and the following messages will appear on the audio system display: "PAIRING OK" (successful connection) and "CONNECT OK" (successful connection establishment). If the system cannot register the phone (message appears "PAIRING FAIL" - unsuccessful connection), then follow the described procedure again or refer to the instruction manual of your mobile phone.
List of connected phones
The list of connected phones shows which Bluetooth® phones have been connected or registered with the system. If this list contains several mobile phones, you can select the desired phone to connect via Bluetooth®.
In the example below the phone will be connected «Mobile 2».
Action | Display messages | |
Briefly press the MENU button | ||
↓ | PHONE SETUP (phone settings) | |
Press the ENTER button | ||
↓ | PAIRED LIST (list of connected devices) | |
Press the ENTER button | ||
↓ | Mobile 1 | |
Turn the MENU/VOL knob | Mobile 2 | |
Press the ENTER button | PLEASEWAIT (please wait) | |
↓ | CONNECT OK (connection established) CONNECT FAIL (connection not established) | |
PAIRED LIST (list of connected devices) | ||
Consistently press the button to exit to the main menu |
Removing a previously connected phone
This function eliminates the connection between the Bluetooth® system and the registered mobile phone.
The example below will disable the mobile phone "Mobile 2", and the phone "Mobile 1" remains connected to the system.
Action | Display messages |
Briefly press the MENU button | |
↓ | PHONE SETUP (phone settings) |
Press the ENTER button | |
↓ | |
Turn the MENU/VOL knob | |
↓ | DELPHONE (deleting phone) |
Press the ENTER button | |
↓ | Mobile 1 |
Turn the MENU/VOL knob | Mobile 2 |
↓ | |
Press the ENTER button | DELETE? |
↓ | |
Press the ENTER button * | DELETED (deletion) |
↓ | DEL PHONE (phone deleted) |
Press the button successively to exit to the main menu |
*For connection «Mobile 2» the display will show «DISCONNECTED» (disabled) then «Mobile 2» and «DELETED» (deleted).
Activating the Bluetooth® function
Enable or disable the Bluetooth® function.
To enable telephone service «hands-free» Bluetooth® function must be activated (with the exception of connection mode, in which it is activated automatically).
Action | Display messages |
Press the MENU button | |
↓ | PHONE SETUP (phone settings) |
Press the ENTER button | |
↓ | |
Turn the MENU/VOL knob | BLUETOOTH |
↓ | |
Press the ENTER button | BLUETOOTH "OFF" (Bluetooth function is disabled) |
↓ | |
Turn the MENU/VOL knob | BLUETOOTH (Bluetooth function enabled) |
↓ | |
Press the ENTER button | BLUETOOTH |
CONNECT OK | |
Mobile phone name | |
Main menu |
Deleting the phone book
To delete all information from the phone book, do the following.
Action | Display messages |
Briefly press the MENU button | |
↓ | PHONESETUP (phone settings) |
Press the ENTER button | |
↓ | |
Turn the MENU/VOL knob | DEL ROOK (deleting phone book) |
↓ | |
Press the ENTER button | DEL ALL? (delete all entries?) (No) |
↓ | |
Turn the MENU/VOL knob | DEL ALL? (delete all entries?) (Yes) |
↓ | |
Press the ENTER button | DELETING (deletion) DELETED (deleted) DEL РBOOK (deleting phone book) |
Consistently press the button to exit to the main menu. |
Phone book
When you press the phone book button, you can select the following options by rotating the MENU/VOLE knob in any direction.
- SEARCH (search)
- Names (contact names)
- Speeddialmode (NAME (speed dial mode/name)
- DELETE NAME (remove name)
- EDIT NAME (edit name)
- ADO NAME (add name)
- Send name using Bluetooth technology add name ( ADD NAME)
You can store up to 100 names and phone numbers in the phone book. To add a new name to the phone book
Action | Display messages |
Press the button for a long time | |
↓ | ADD NAME (Add name) |
Press the ENTER button | |
↓ | ENTER NAME (enter name) |
Turn the handle "MENU/VOL" | ABC |
↓ | |
Move the cursor to «J» | IJK |
Press the ENTER button | |
↓ | |
Turn the MENU/VOL knob | |
Move the cursor to "0" | NOP |
↓ | |
Press the ENTER button | |
↓* 1* 3 | JO |
Turn the handle "MENU/VOL" | OK<©OKA> |
↓ | |
Press the ENTER button | |
↓ | ENTER NUMBER (enter phone number} |
Press the ENTER button then turn the MENU/VOL knob | 1 |
↓* 2* 3 | |
Press the ENTER button | 123456789 |
↓ | |
Turn the MENU/VOL knob | |
↓ | OK (®oka) |
Press the ENTER button | SAVED (saved) |
Consistently press the button to exit to the main menu |
Notes: In the example above, a contact name has been added to the phone book «JO» and telephone number 123456789.
*1. To enter special characters, select the following options A: Letters, 1/2: Numbers, (A): Latin letters and @: Special characters.
*2. Select a character, then confirm your selection by pressing ENTER/ Repeat the procedure for each character.
*3. To correct the character, briefly press the button, then enter the correct character. To delete all entered characters, press the button for more than 1 second.
Note: For frequently used phone numbers, you can also store the name and phone number using one of the radio preset buttons.
Sending information to the phone book
You can also transfer the name and phone number from the connected mobile phone to the phone book using the Bluetooth® function.
Action | Display messages |
Briefly press the button | |
↓ | |
Turn the MENU/VOL knob | (ADD NAME (add name) |
↓ | |
Press the ENTER button | SEN D NAME (send name) |
↓* 1* 2 | JOE |
↓* 3 | 0123456789 |
Press the ENTER button | |
↓ | SAVE |
Press the ENTER button | |
↓* 4 | SAVED (Saved) SEND NAME (Forward name) |
Press the button successively to exit to the main menu |
*1. The Bluetooth® symbol will flash for 2 minutes.
*2. Send the name from your registered mobile phone within 2 minutes.
*3. The display will show the phone number.
*4. When you perform the save operation, the Bluetooth® connection will be temporarily disabled.
Editing
You can edit the name or phone number recorded in the phone book.
Action | Display messages |
Press the CS1 button | |
↓ | |
Turn the MENU/VOL knob | |
1 | EDIT NAME (edit name) |
Press the ENTER button | |
↓*1 | |
Turn the MENU/VOL knob | JOE |
↓ | |
Press the ENTER button | |
↓ | JOE OK |
Turn the MENU/VOL knob | |
Move the cursor to «Y» | JOE |
Press the ENTER button | |
↓*2 | JOEY |
Turn the MENU/VOL knob | |
↓*3 | OK |
Press the ENTER button | |
↓ | EDIT NUMBER (edit number) OK <@OKO> |
Press the ENTER button | |
↓ | SAVED (saved) EDIT NAME (edit them) |
Click on the button to exit to the main menu |
*1 As an alternative, you can use the SEARCH mode to select the entry to be edited.
- SEARCH appears on the display (search) press the ENTER button (input).
- Select the first letter of the name then press the ENTER button (input).
- The display will show names starting with this letter. If necessary, select a name using the MENU/VOL rotary encoder.
*2 When you briefly press the button, the cursor moves back one position and the last character entered is erased. To erase all entered characters, press the return button and hold it pressed for more than 1 second.
*3 If necessary, you can edit the phone number. After editing the name, select OK, then press the ENTER button to confirm and edit the phone number in the same way as described for editing the name.
Removing a name
To delete a name from the phone book, do the following:
1. Briefly press the button.
2. Rotate MENU/VOL knob to select DELETE NAME (name removal).
3. Press the ENTER button.
4. Rotate the MENU/VOL knob to select the name you want to delete and then press the ENTER button.
5. The display will show «DELETE? YES» (delete? Yes). If necessary, rotate the MENU/VOL knob to select «DELETE? NO» (delete? No).
6. Press the ENTER button to confirm your selection.
7. The display will show «DELETED» (deleted).
You can also use search mode like this:
1. Briefly press the button.
2. The display shows «SEARCH» (search) then press the ENTER button.
3. Select the first letter of the name then press the ENTER button.
4. The display will show names starting with that letter. If necessary, select a name using the MENU/VOL rotary encoder.
5. Press the ENTER button, the display will show «DELETE? YES» (delete? Yes). If necessary, rotate the MENU/VOL knob to select "DELETE? NO" (Delete? No).
6. To confirm, press the ENTER button.
Speed dial buttons
After entering names and phone numbers, you can program preset buttons for your six most frequently called calls.
1. Click on the button.
2. Select a name using the MENU/VOL knob or using the search function.
3. When you find the name you want, press the Preset button until you hear a confirmation beep. The selected name and phone number are now stored under this preset button.
Mobile phone control "HANDS-FREE"
You can control your mobile phone «hands-free» using the control buttons on the audio system panel or using the buttons on the steering wheel (if available).
Outgoing call
You can initiate an outgoing call in one of the following ways:
- using the redial button;
- using the phone book;
- using a voice shortcut;
- using the speed dial buttons.
Note: You can adjust the volume during a call. To do this, briefly press the MENU button and then adjust the volume by rotating the MENU/VOL knob. The adjustment range is from -2 to +2. To confirm the adjustment, press the ENTER button or the button or wait 10 seconds for the display to return to the main active call menu.
Redial a number
Use this feature to dial at least the last person you called.
1. Briefly press the button.
2. Select REDIAL.
3. Press the ENTER button or the button to redial the last number.
Outgoing call using the phone book.
To dial a number stored in the phone book, do the following:
1. Click on the button.
2. Rotate the MENU/VOL knob to select the desired name.
3. Press the ENTER button or the button to dial the corresponding number.
You can also use the search function like this:
1. Briefly press the button.
2. The display shows «SEARCH» (search), then press the ENTER button.
3. Select the first letter of the name then press the ENTER button.
4. The display will show names starting with that letter. If necessary, select a name using the MENU/VOL rotary encoder.
5. Press the ENTER button or the button to dial the corresponding number.
Dialing a number using voice command
If your phone supports voice command recognition, you can use voice commands instead of manually dialing a number, provided that the caller's name and number are previously stored in your mobile phone's phone book and tagged with a voice command. For more details please contact «User manual» which should be attached to your mobile phone.
To make an outgoing call using a voice command, do the following:
1. Press the button and hold it for more than 2 seconds.
2. The display will show "SPEAK NOW" (speak now).
3. Say a voice command. Say your voice command clearly and in the direction of the microphone located on the ceiling in front of the rear view mirror.
4. If the voice command is recognized, the system will dial the corresponding phone number.
Call using speed dial buttons
To make a call using the speed dial buttons, do the following:
1. Briefly press the button.
2. Click on the corresponding preset button (1-6). You can also select the corresponding number by rotating the MENU/VOL knob.
Receive incoming calls
When you receive an incoming call, the display will show the name of the caller (or inscription «NO NUMBER» «number not defined) and you can:
- Accept a call by briefly pressing the button.
- End the call after the conversation by pressing the button.
- Reject the call by pressing the BACK button.