Electric sunroof
Sun blind
To open or close the sunshade (1) move it. The sunshade will open automatically when the sunroof is opened. The sunshade is closed manually.
Sliding sunroof
- To fully open or close the sunroof, press the appropriate side of the CLOSE switch (2) or OPEN (3) for less than a second. To stop the sunroof in an intermediate position while opening or closing, press the switch again.
- To partially close or open the sunroof, press the appropriate side of the CLOSE switch (2) or OPEN (3) and keep the switch pressed for more than one second. The sunroof will begin to move and will stop when you release the switch.
Sunroof panel tilt
- To tilt the sunroof, first close it and then press and hold the UP side (3) sunroof drive switch in less than one second. To lower the sunroof, press the DOWN side of the switch (2).
- The sunroof will fully raise or lower. To stop the sunroof in an intermediate position while opening or closing, press the switch again.
- To partially raise or lower the sunroof, press the appropriate side of the CLOSE switch (2) or OPEN (3) and keep the switch pressed for more than one second. The sunroof will begin to move and will stop when you release the switch.
Car service function
- The auto service function allows you to automatically stop closing the hatch if there are any objects in the opening.
- If the safety feature is activated or the battery is low, the sunroof may not close properly. In this case, you need to press the switch button and hold it in position (3) CLOSE until the hatch closes on its own. The sunroof will begin to close when the protective function is disabled. Fully opening and closing the hatch will restore normal operation of its drive.
- If the power sunroof does not function properly, perform the following adjustment procedure:
1. If the sunroof is open, close it by repeatedly pressing the CLOSE side of the switch (3).
2. Press the CLOSE side (3) switch and keep it pressed to rotate the sunroof up.
3. Release the sunroof power switch.
4. Press and hold the CLOSE side (3) switch for more than 4 seconds.
5. Release the switch once the sunroof is completely closed.
6. Check the operation of the sunroof drive.
- If, after performing the procedure described above, the power sunroof does not function properly, contact a service station.