1. Reversing light bulb; 2. Reversing light bulb socket; 3. Reversing light housing.
Removal and installation
Attention. Disconnect the cable from the negative terminal of the battery or remove the power fuse.
Removal
1. Unscrew the reversing light mounting bolts.
2. Insert a suitable tool into the gap between the reverse light and the rear bumper cornice and remove the light.
3. Disconnect the connector from the reverse light.
Installation
Installation is carried out in the reverse order of removal.
Replacing light bulbs
Attention. Disconnect the cable from the negative terminal of the battery or remove the power fuse.
Reverse light
1. Remove the clamps (A).
2. To gain access, press the rear bumper cornice.
3. Turn the light bulb socket (1) counterclockwise and unlock it.
4. Take out the light bulb (2) from the cartridge.