Rear wheel hub and front axle housing
Checking fastening elements
Make sure that the condition of the marking elements (backlash, gap) all components and condition of components (wear damage) correspond to the norm.
Checking wheel bearings
- Move the wheel hub and bearing assembly axially by hand. Make sure there is no play in the wheel bearing.
Standard.
Axial play: See paragraph below. «Technical data and specifications».
- Rotate the wheel hub and check for any unusual noise or other abnormalities. If there are deviations, replace the wheel hub and wheel bearing assembly.
Rear drive shafts
Examination
- Check for play or other damage at the drive shaft mounting points and at the joint.
- Check the covers for cracks and other damage.
Attention. If noise or vibration comes from the drive shaft, replace the drive shaft assembly.