60/40 folding seat. 1. Headrest; 2. Seat cushion padding; 3. Seat cushion trim; 4. Seat back center bracket cover; 5. Seat back shield; 6. Seat belt trim; 7. Seat belt buckle; 8. Center seat belt retractor; 9. Inertial coil cover; 10. Protective pad for seat back lock; 11. headrest lock (to unlock); 12. headrest clamp (for blocking); 13. Seat back lock button; 14. Seat back lock button trim; 15. Seat back padding; 16. Seat back trim; 17. TORX bolt; 18. Seat back lock assembly; 19. Seat back side bracket; 20. Tilt mechanism cover; 21. Seat back frame; 22. Seat back center bracket; 23. Seat latch loop; 24. Outer seat back support bracket; 25. Lower seat back support.
40/20/40 folding seat. 1. Headrest; 2. Seat cushion padding; 3. Seat cushion trim; 4. Seat back center bracket cover; 5. Seat back shield; 6. Seat belt trim; 7. Seat belt buckle; 6. Center seat belt retractor; 9. Inertial coil cover; 10. Armrest hinge cover; 11. Seat back padding (central); 12. Armrest assembly; 13. Armrest cover; 14. Protective pad for seat back lock; 15. Headrest lock (to unlock); 16. Headrest lock (for blocking); 17. Seat back lock button; 18. Seat back lock button trim; 19. Seat back padding; 20. Seat back trim; 21. TORX bolt; 22. Seat back lock assembly; 23. Seat back side bracket; 24. Tilt mechanism cover; 25. Seat back frame; 26. Seat back center bracket; 27. Seat latch loop; 28. Outer seat back support bracket; 29. Lower seat back support.
Removal and installation
Removal
Attention. To prevent damage to components, cover them with cloths when removing and installing them.
1. Remove the seat cushion.
- Raise and fold the seat cushion.
- Compress the seat cushion hinge (1) and remove it through the side hook on the body.
- Remove the seat cushion assembly (right/left) from the car.
2. Remove the headrest.
3. Remove the seat back.
- Unscrew the center seat seat belt anchor nut.
- Disengage the latches, then remove the seatback center bracket cover.
- Unscrew the mounting bolts (A) seat back center bracket.
- Remove the luggage compartment trim mask. See section above «Interior equipment».
- Unscrew the fastening nut (IN) and bolt (WITH) seat back side bracket.
- Remove the seat back assembly (right/left) from the car.
4. Remove the seatback center bracket.
- Remove the center trim of the luggage compartment floor. See section above «Interior equipment».
- Unscrew the seat back center bracket mounting bolt.
- Remove the seatback center bracket from the vehicle.
5. Remove the seat latch hinge.
- Remove the lower side trim of the luggage compartment. See section above «Interior equipment».
- Unscrew the seat latch hinge mounting bolt.
- Remove the seat latch hinge from the vehicle.
6. Remove the outer seat back support bracket.
- Unscrew the mounting bolts and nuts of the outer seat back support bracket.
- Remove the outer seat back support bracket from the vehicle.
7. Remove the lower seat back support.
- Unscrew the mounting bolts of the lower seat back support.
- Remove the lower seat back support from the vehicle.
Installation
Installation is carried out in the reverse order of removal.
Attention. To prevent damage to components, cover them with cloths when removing and installing them.
Disassembly and assembly
Seat back
Disassembly
1. Remove the seat back shield.
A. 60/40 folding seat.
Unfasten the clips, disengage the latches by pressing the seat back shield, and remove it.
b. 40/20/40 folding seat.
- Unfasten the clips, remove the latches from the clasp, pressing the seat back shield and remove it.
2. Remove the center seat belt retractor.
3. Remove the armrest assembly (only on 40/20/40 folding seat).
- Disengage the metal clips, then remove the armrest hinge cover.
- Unfasten the wire rings from the back of the seat back, wrap the seat back trim on the underside of the armrest and remove the seat back padding (central).
- Unscrew the mounting bolts (A) And (IN) and remove the armrest cover and armrest assembly.
4. Remove the seat back trim and padding.
- Unscrew the fixing screw and remove the protective pad for the seat back lock.
- Remove the holder from the back of the seat.
- Remove the headrest lock (see fig.)
Attention. Before installing the headrest clamp, check the installation direction front/rear, right/left.
- Turn the seat back lock button counterclockwise and remove it.
- Squeeze the seatback lock button trim latches through the padding and seatback frame and remove it.
- Remove the backrest trim and padding from the seatback frame.
- Unfasten the wire rings and separate the trim from the padding.
5. Remove the seatback lock assembly.
- Unscrew the mounting bolt (A) and TORX bolt (0) and remove the seat back lock assembly.
6. Remove the seatback side bracket.
- Unscrew the mounting bolt (A) and remove the seatback side bracket.
Assembly
- Assembly is performed in the reverse order of disassembly.
Caution: Reinstall the seatback trim wire rings, then securely connect the trim or trim cord to the seatback frame and padding side wire.
Seat cushion
Disassembly
1. Remove the fasteners and wrap the seat back trim.
2. Unfasten the wire rings and separate the trim from the seat cushion padding.
Assembly
Assembly is performed in the same order as disassembly.
Attention. Reinstall the seat cushion trim wire rings, then securely connect the trim cord to the seat cushion frame and the padding side wire.