Corner molding. 1. Front corner molding; 2. Rear corner molding; 3. Rubber bushing; 4. Front mudguard; 5. Rear mudguard.
Removal and installation
Removal
Front corner molding
1. Unscrew the mounting screws and remove the front mudguard.
2. Remove the mounting screws from the front corner molding.
3. Disengage the front corner molding clips and latches.
4. Remove the front corner molding.
Rear corner molding
1. Unscrew the mounting screws and remove the rear mudguard.
2. Remove the mounting screws from the rear corner molding.
3. Disengage the rear corner molding clips and latches.
4. Remove the rear corner molding.
Installation
Installation is carried out in the reverse order of removal.
Attention. When installing the corner molding, check that the blind clips are seated correctly over the holes in the body panel, then press them in.