Front wing. 1. Front fender; 2. Front fender trim.
Removal and installation
Removal
1. Remove the front corner molding. See section below «Exterior equipment».
2. Remove the radiator grille. See section below «Exterior equipment».
3. Remove the front bumper cornice. See section below «Exterior equipment».
4. Remove the front combination lamp.
5. Remove the inner fender trim. See section below «Exterior equipment».
6. Remove the front fender trim.
7. Remove the side turn signal light. See chapter «Driver-controlled instruments».
8. Unscrew the mounting bolts and remove the front fender.
Attention. To avoid damaging the body, cover it with a napkin during removal.
Installation
Installation is carried out in the reverse order of removal.
Attention:
- After installation, check the fit of the front fender. See above.
- After installation, apply paint (to match the body color) on the heads of the front fender mounting bolts.