Removal and installation
Removal
Attention:
- Make sure the glass cover is completely closed before removing the sunroof motor.
- After removing the sunroof motor, do not attempt to rotate it separately from the cover.
1. Remove the ceiling. See section above «Interior equipment».
2. Disconnect the connector (A) and terminal (IN) from the engine hatch assembly. Unscrew the TORX mounting bolts (From the sunroof motor assembly, then remove the sunroof motor assembly (1) and engine hatch cover (2).
Installation
Attention. Before installing the sunroof motor assembly, position the linkage and cable assembly in a symmetrical and fully closed position.
1. Move the engine sideways a little at a time until the mechanism is fully engaged with the sunroof cable and the mounting surface is parallel. Then secure the engine with TORX bolts.
2. Install the ceiling. See section above «Interior equipment».