Clutch Master Cylinder — Bulkhead

1. Remove the master cylinder and clean it.

2. Pull off the rubber dust cap, remove the retaining ring from the master cylinder hole and remove the pusher assembly. Loosen the locknut and unscrew the clamp to remove the dust cap.

3. Press the piston with a screwdriver and unscrew the piston stroke limit screw. Remove the piston assembly and spring from the master cylinder.

4. The reservoir body can be removed by loosening the reservoir bracket clamp screw.

5. Clean all components completely using alcohol or clean hydraulic fluid. Never use mineral solvents such as gasoline.

6. Carefully check all parts of the master cylinder. The cylinder and piston must fit exactly, without scratches, corrosion, or wear.



7. Assembly is carried out in reverse order.



8. Install the master cylinder to the vehicle.