2. Unscrew the front and rear installations (photo) balancer, remove it.
16.2A. Front mounting of the longitudinal balancer of the rear suspension (marked with an arrow)
16.2B. The rear end of the longitudinal balancer is bolted to the base of the suspension strut (marked with an arrow)
3. Check the condition of the longitudinal balancers. If there are splits, rust or deformation, the balancer and bushings must be replaced.
4. If the bushings are worn, they must be replaced.
5. When installing, the front lock nut of the mounting bolt should face outward. Lightly tighten the bolts, lower the car and rock it to adjust the suspension components. Tighten the mounting bolts to the torque specified in Specifications.