Steering wheel — removal and installation Removal and installation 1. Place the vehicle on level ground with the wheels straight ahead and check that the steering wheel is in neutral (see below). 2. Disconnect...
Steering column — removal and installation Fig. 10.30 Steering column elements: 1. Column assembly; 2. Retaining ring; 3. Washer; 4. Spring washer; 5. Tilt adjustment lever; 6. Bracket; 7. Top installation of the...
Steering column — bulkhead 1. Remove the column as described in previous chapter . 2. Loosen the clamp and remove the bulkhead cover. Remove the seat belt buckle switch base. 3. Check the play...
Outer tie rod ball joint — removal and installation 1. Apply the handbrake, engage 1st or 3rd gear (manual transmission) or "R" (automatic transmission). 2. Remove the wheel trim, loosen the wheel nuts. 3. Jack up the...
Steering gear — removal and installation Direct steering system 1. Apply the handbrake, engage 1st or 3rd gear (manual transmission) or "R" (automatic transmission). 2. Remove the wheel caps and loosen the...
Steering gear — checking in the car Checking the traction adjustment 1. First check that the tires are in good condition and have normal pressure. 2. Accelerate the vehicle, level off the vehicle and check...
Steering gear — bulkhead Pic. 10.35. Correct installation of gear nut oil seal - direct action steering Depth L = 1.5±0.3 mm Direct action steering Fig. 10.36. Elements of the power steering...
Power steering pump — removal and installation 1. Clamp the large pressure hoses from the feed reservoir to the pump and from the pump to the steering gear connection. Unscrew the coupling and disconnect the hose...
Power Steering Pump — Bulkhead 1. Remove the pump from the vehicle. 2. Carefully clamp the pulley in a vice and unscrew the lock nut. Remove the washer and pump from the pulley. If the pump is damaged...
Power steering pressure switch, pipes and reservoir Fig. 10.37. Power Steering Pipe System and Reservoir: 1. Metal pipe of the steering gear to the gear housing; 2. Pressure sensor; 3. Heat shield screw; 4. Front half...
Power steering fluid — filling and bleeding 1. When refilling, use only good quality fluid of the type used. 2. Check the fluid level in the reservoir. 3. The system needs to be bled if the fluid level has dropped...