Note: Before starting work, read the Note at the beginning of Chapter 18 regarding the hazards of asbestos dust.
1. Remove the wheel and brake drum as described in Chapter 13 from Section 10.
2. Remove the brake shoes as described in Chapter 18 from this Section.
3. Remove the brake slave cylinder as described in Chapter 19 from this Section.
4. Release the handbrake cable from the shield (early models) or unscrew and remove the cable (late models),
5. Unscrew the shield of the lower end of the suspension strut.
6. When installing, completely clean the bottom end of the stand and the shield. Install the shield, tighten the mounting bolts with the tightening force specified Specification.