10.1. Early type master cylinder - control valve marked with arrow
2. Unscrew the connecting nuts and disconnect the hydraulic lines.
3. Disconnect the electrical wiring from the tank.
4. Unscrew the two nuts that secure the master cylinder to the vacuum booster. Loosen the vacuum booster control valve clamp and move the suspension up.
5. Remove the master cylinder from the vacuum booster struts and rod.
6. Installation is carried out in reverse order. Fill the reservoir with new fluid and bleed the system.
7. After bleeding the system, check the fluid level in the master cylinder reservoir.
Pic. 9.9. Master cylinder hydraulic connections on late models