Car doors, locks and windows Nissan Bluebird T12

Windshield, rear window/tailgate window and rear triangular interior windows — removal and installation
1. These parts are attached directly to the body and trying to remove and install them at home is not recommended. 2. This requires special primers and insulator along...

Hatch — general description
Pic. 11.10. View of the hatch disassembled, on cars built in the UK: 1. Screw; 2. Bracket coating; 3. Hatch handle - option with mechanical drive; 4. Screw; 5. Motor...

Trunk lid (Sedan) — removal and installation
1. You will need an assistant. First, with the trunk lid open, place a thick cloth pad below each front corner to protect the paint. 2. Disconnect the wires from the...

Backdoor (Hatchback) — removal and installation
1. You will need an assistant. First, with the trunk lid open, place a thick cloth pad below each front corner to protect the paint. 2. Remove the left door pillar trim...

Rear door pillar (Hatchback) — removal and installation
1. Open the back door and support it with a wooden block. 2. Release each post from its mountings by removing the mounting clamps with a small screwdriver, then remove...

Trunk/Tailgate and Fuel Filler Flap — Removal, Installation and Adjustment
1. Open the tailgate and tailgate, then remove the tread panel and door pillar trim panels ( see Chapter 33 of this Section ). 2. Remove the mat to access the opening...

Rear Door/Trunk Lid Latch and Strike Plate — Removal, Installation and Adjustment
Pic. 11.11. Cable opening the trunk lid/rear door and cable of the flap lever 1. Gate valve; 2. Impact plate; 3. Opening lever; 4. Lever cable; 5. Opener lock nut; 6....

Rear door/trunk lid lock cylinder — removal and installation
Sedan 1. Open the trunk lid and disconnect the rod from the lock cylinder, removing the fastener. Remove the spring clip to release the lock. 2. Assembly is carried out...

Fuel tank flap lock bushing — removal and installation
1. Open the fuel flap and remove the spring clip to remove the lock (see photo). Note that the lock strike plate is also secured by a spring clip. 24.1. Fuel Tank Flap...

Door — removal, installation and adjustment
1. Open the door and remove the interior trim panel ( see Chapter 33 of this Section ). Remove and disconnect the speaker, then disconnect and remove (where is it...

Door Latch, Strike Plate and Handles — Removal and Installation
Door latch 1. Open the door, close the window completely, then remove the door interior trim panel ( see Chapter 33 of this Section ). 2. Remove the protective...

Front door lock cylinder — removal and installation
1. Open the door and make sure the window is completely closed, then remove the door interior trim panel ( see Chapter 33 of this Section ). 2. Remove the polyethylene...

Door window glass and window lift regulator — removal and installation
Window glass 1. Open the door and remove the interior trim panel ( see Chapter 33 of this Section ). 2. Remove and disconnect the speaker. 3. Disconnect and remove...

Central locking — general information
1. Four car interior doors (without trunk lid) can be closed, on some models, by a central locking system. 2. The system allows all four doors to be locked by turning...

Mirrors — removal and installation
Exterior mirrors 1. Remove the plastic cover plate from the corner of the front door, then remove the screw and panel (see photo). 31.1A. Remove the triangular cover......

Exterior mirror glass — replacement
1. Outside mirror glass is available for replacement, but please note that the glass is correctly selected to fit the remote control mirrors, including the heated...