Engine overhaul of 2.0 liter car Nissan Sunny 7 (B13)

Dismantling and overhaul of the engine — general information
This subsection discusses in detail the procedure for performing such work as dismantling the power unit from the vehicle and overhauling the cylinder head, cylinder...

Indications for engine overhaul
It is not always easy to come to the conclusion about the feasibility of a complete overhaul of the engine, since it is necessary to be based on a number of indicators....

The procedure for disassembling and assembling the engine
Cylinder block, crankshaft and connecting rod and piston group 1. Gland holder; 2. Cylinder block; 3. Coolant pump; 4. Generator bracket; 5. Timing chain cover; 6....

Dismantling the power unit — methods and safety precautions
If it was decided to dismantle the engine for a major overhaul, or repair of the main components, then certain preparatory measures must be taken. It is extremely...

Power unit with manual transmission — removal and installation
Dismantling Attention! The engine can be dismantled from the car as part of the power unit (those. complete with transmission), then the transmission is separated from...

The power unit with automatic transmission — removal and installation
Dismantling Attention! The engine can be dismantled from the car as part of the power unit (those. complete with transmission), then the transmission is separated from...

Cylinder head — disassembly and assembly
Disassembly Attention! New and overhauled cylinder heads are supplied as spare parts to repair points by the manufacturer. Due to the fact that specialized tools are...

Cylinder head and valves
A thorough cleaning of the cylinder head and valve mechanism parts, followed by a check, will allow you to estimate the amount of work to repair the valves and the valve...

Piston assembly with connecting rod — removal
1. Remove the cylinder head and oil pan. 2. If a shoulder has formed in the upper part of the cylinders, then it must be removed with a reamer or scraper, without...

Removing and checking the condition of the crankshaft
Removing 1. Remove oil pan, chain (or chains) and flywheel. 2. Remove the piston rods. Attention! If no repair work is carried out with the pistons and connecting rods,...

Mounting and checking the clearances in the main bearings of the crankshaft
Selection of liners for new main bearings Attention! Description applies to standard size main bearings only. Repair inserts are not divided into size groups. Size group...

Cylinder block and crankshaft — cleaning and checking
Cleaning 1. Remove all attachments and sensors from the cylinder block. For cleaning, you also need to get the plugs. To do this, drill a small hole in the plugs, into...

Connecting rod and piston group — condition check
Correct mutual orientation of piston and connecting rod 1. Piston size group number; 2. Orientation mark (in the form of an arrow); 3. Oil hole in the body of the...

Installing and checking clearances in connecting rod bearings
Attention! Description applies to standard size connecting rod bearings only. Repair connecting rod bearings are not divided into size groups. New connecting rod...

Main and connecting rod bearings — condition check
Types of wear of main and connecting rod bearings A. Scratches due to dirt embedded in the coating material; B. Insufficient lubrication, local wiping of the bearing...

Piston rings — removal and installation
The scheme of installation of rings on the piston 1. For SR20DE modification 2. For modifications SR20Di and SR20De Arrangement of joints of piston rings 1. Top...

Starting the engine after overhaul
1. After completing the engine assembly, double check the oil and coolant levels. Check the correct connection of the wiring and hoses, remove all foreign objects from...