Car steering Nissan Sunny 7 (B13)

Steering wheel — removal and installation
Attention! This description does not apply to vehicles with an airbag. Removing 1. Disconnect the battery from the ground. 2. Set the wheels to the straight ahead...

Ignition switch and steering column lock
Removal and installation 1. Disconnect the battery from the ground. 2. Remove steering column pads (see subsection 13.26 ). 3. Disconnect the connector from the ignition...

Steering column — removal, inspection and installation
This description does not apply to vehicles equipped with an airbag. Removing 1. Disconnect the battery from the ground. 2. Remove the steering wheel. 3. Remove switches...

Steering gear — removal, inspection and installation
Attention! This description does not apply to vehicles equipped with an airbag. Steering gear without hydraulic booster Removing 1. Raise the front of the car and place...

Steering gear covers — replacement
1. Disconnect the tie rod. 2. Loosen the tie rod lock nut. 3. Mark the position of the edge of the cover on the rail and unclench the spring rings, remove the cover. 4....

Removal of air from a hydraulic drive of a steering
Air should be removed from the hydraulic drive if bubbles appear in the tank, when clicks and increased noise are heard during pump operation. When the steering wheel is...

Power steering pump — removal and installation
Removing 1. Raise the front of the car and place on stands. 2. Remove the pump drive belt. 3. Unscrew the bolt of the high pressure ring fitting, disconnect the hose...

Tie rod ends — removal and installation
1. Raise the front of the car and place on stands. 2. Remove the wheel. 3. Loosen and loosen the tie rod nut, press out the tip hinge, unscrew the nut. 4. Loosen the tie...