Be careful not to get oil on the insulators, and do not damage the insulators during installation.
Install the left insulator stopper (gear side) the front mark towards the front of the car.
Install the front and rear ACM with the marks to the right side.
Tags on AFM:
- Front side (for 2WD, 4WD models): F
- Backside (2WD models): R2
- Backside (4WD models): R4
Install the rubber grommets in the front holes for the center support beam mounting bolts, aligning the mark (YD) up.
Tighten the set bolts of all insulators without twisting the insulators, starting from left.
Insert the ACM wiring connectors and secure the wiring with clamps at the designated locations.