Note: The illustration shows a model with an SR engine. On models with a YD engine, the appearance of the radiator, the type and connection points of the radiator hoses and the automatic transmission oil cooler hose are different.
Attention: Drain the coolant on a cold engine.
Preparatory work
Remove the engine protection from the bottom. Drain the coolant.
Remove the airflow guide from the radiator core support (YD).
Disconnect the fan motor wiring connectors.
Remove the A/C pipe bracket (SR).
Disconnecting the automatic transmission oil cooler hose
Plug the hose immediately with a stopper to prevent automatic transmission fluid from spilling out.
Removal and installation of a radiator in gathering
Attention: Do not damage the radiator core during work.
Removing
1. Disconnect all hoses.
2. Remove the fans, then the heatsink.
Installation
Installation is carried out in the reverse order of removal.