System Description
The speedometer, tachometer, odometer and mileage indicator, fuel gauge and low fuel warning lamp, as well as the temperature gauge are combined in one housing along with the control unit.
The diagnostic checks the segment circuit of the odometer and mileage indicator and each measuring device (speedometer, tachometer, fuel gauge, temperature gauge).
Location of components
Diagnostic function
Checking the segments and the low fuel warning light
1. After the mileage indicator displays, turn the ignition key to the ACC or OFF position.
2. While pressing the odometer and odometer button, turn the ignition key to the ON position.
3. Make sure the mileage is displayed «0000.0 km».
4. Within 5 sec. press the odometer and odometer button three times.
5. All segments of the odometer and mileage indicator should light up, as well as the low fuel warning lamp.
Measuring chain check
6. After checking the segments, press the odometer and odometer button. If, while holding the button down, the arrows of the pointers are set to the positions indicated in the figure, then the devices are working (the low fuel warning light should go out).
Note: After the diagnostics, the odometer readings are reset to zero.
Cancel diagnostic mode
Turn the ignition key to the ACC or OFF position.