Removal and installation
1. Sunroof Models: Remove the front right roof molding.
Note: If the molding cannot be removed, break the clips and remove it.
Caution: If clips are broken, install new clips first, then install molding.
2. Loosen the two fixing screws of the antenna support, disconnect the drain hose and the antenna feed connector.
Caution: Secure the feeder connector and drain hose so that they do not fall into the body pillar.
Antenna rod
Replacement
1. Remove the antenna from the vehicle.
2. Remove the stem stop and pull the stem out.
Note: If the stopper cannot be removed, remove it using pliers or a similar tool.
Caution: Before installing, apply sealant to the screw to prevent it from coming loose.
 |  |