Disassembly
Turn the surface of the mirror glass up.
Stick the tape on the mirror housing.
Insert a screwdriver into the gap between the mirror (holder) and holder bracket so as to release the two latches on the bottom of the holder.
Caution: Do not use force to release only one latch, always release both latches.
Assembly
Install the mirror holder bracket and mirror housing (drive unit) to a horizontal position.
Insert the upper latch into the mirror holder bracket first, then press the bottom of the mirror glass until it clicks into place.
Attention: After assembly, check and make sure that the two latches on the bottom surface of the mirror are firmly fixed.
Removing the drive unit and electrical unit
Disconnect the wiring connector and remove the wiring from the mirror.
Note: Before removing, mark the location of the connector and wiring.