Gap adjustment
Loosen the rear roller fixing bolts, loosen the roller bracket nuts and adjust the position of the door by moving it forward or backward.
Level control
Loosen the fixing nuts and bolts of the upper and lower rollers and adjust the position by moving them left and right.
Lock loop adjustment
Adjust the hinge so that it is parallel to the direction of entry of the door lock.
- Standard gasket thickness: 1 or 2mm
Upper baffle adjustment
Install the body-side bumper seal, close the door slightly and tighten the fasteners.
Lower bump adjustment
Install the bumper seal on the door side.
Install the body-side bumper seal, close the door slightly and tighten the fasteners.