Note. The following procedures are described using the petrol version as an example. Operations for diesel versions are similar, taking into account the design features.
Removing
1. Remove the intake duct.
2. Disconnect the mass air flow sensor connector.
3. Remove the positive crankcase ventilation hose.
4. Remove the air filter housing with the mass air flow sensor assembly and the air duct with the resonator by disconnecting their fasteners.
5. Remove the air filter housing.
6. If necessary, remove the mass air flow sensor from the air filter housing.
Attention.
- Be careful when handling the mass air flow sensor, avoid impacts.
- Do not touch the sensor part of the sensor.
Check after removal
Check the air duct and resonator assembly for cracks or wear. If any defects are found, replace the air duct with the resonator assembly.
Installation
Installation is made in an order, the return to removal.
Note. Align labels. Connect all fasteners. Tighten all screws securely.