Vehicle wiring harnesses Nissan Qashqai 1 (J10)

Wiring harnesses and connectors
Connector designation example: 1. Connector type. 2. Number of pins. 3. Embracing (F, «Mother») or pin (M, «dad») connection parts. 4. Connector color. 5. Special type....

Engine wiring harness
HR engine MR engine K9K engine K9K engine with particulate filter M9R engine

Body wiring harness
Left-hand side Right side

Checking the voltage of the car's electrical systems
1. Provide conditions under which voltage is present at the control points. Example: (A) - the ignition switch is on. (IN) - the ignition lock and switch SW1 are on....

Checking the continuity of the circuit and the resistance of the electrical systems of the car
1. Disconnect the battery terminal or wire to remove voltage between test points. 2. Connect two ohmmeter wires to the circuit points to be tested. If there are diodes...

Detection of a short circuit in the vehicle's electrical systems
1. Remove the blown fuse and disconnect the entire fuse load. 2. Connect a test lamp to the fuse socket. 3. Provide conditions for the control lamp to light up. Example:...

Disconnecting vehicle electrical connectors
Attention. To disconnect connectors, pull directly on the connector, not on the wire. Note. Before you pull the connector, you need to check which part of it is...