Vehicle lighting and alarm Nissan Patrol 4 (Y60)

Headlight maintenance — removal and installation
1. Disconnect the negative cable from the battery. 2. On utility models (Van) (Utility) and mini truck (Cab Chassis) release the fixing clips and remove the radiator...

Replacing the semi-sealed headlamp bulb
1. Disconnect the negative cable from the battery. 2. Disunite an electric socket of a head lamp. 3. Remove the rubber protective cover from the back of the headlamp,...

Headlight adjustment
1. Make sure the tire inflation pressure is correct and the fuel tank is full. Park the unloaded vehicle on a level, level surface. Place an assistant in the driver's...

Replacing parking light bulbs
Note. On Utility models (Van) and Late Year Mini Truck fitted with front combination lamps of the same design as the Hardtop and Wagon models (maintenance procedures are...

Replacing turn signal bulbs
All models except Utility (Van) and mini truck 1. Give fixing screws and remove assembly of the combined lantern. 2. Turn the cartridge counterclockwise and remove it...

Replacement of lamps of separately installed direction indicators
Models of later years of release Installation is in the reverse order. 1. First check the cartridge for signs of corrosion, and the lamp itself for compliance with the...

Maintenance of the rear combination lamps
All models except Utility (Van) and mini truck) 1. Give fixing screws and remove assemblage of a lantern of the car. 2. Turn the cartridge counterclockwise and remove it...

Replacing reversing light bulbs on late model Hardtop and Estate models
1. Give fixing screws and remove assemblage of a lantern of the car. 2. Press the lamp, turn it counterclockwise and remove it from the socket (see accompanying...

Replacing High Level Brake Lamps (Late Models)
1. Using a screwdriver, remove the trim from the brake light assembly. 2. Turn the bulb socket counterclockwise and remove it from the lens. 3. Pull the bulb out of the...

Replacing the license plate lamp
1. Loosen the fixing screws and remove the lamp lens together with the seal. 2. Press the lamp, turn it counterclockwise and remove it from the socket (see accompanying...

Replacing the interior lighting lamp when opening the doors
Utility Models (Van) and mini truck 1. Using a small screwdriver, carefully remove the cover from the lamp body. 2. Grasping the bulb, gently pull the bulb out of the...

Replacing the navigation lamp (models of later years of production)
1. Carefully prying with a screwdriver, remove the cover from the lamp assembly. 2. Press the lamp, turn it counterclockwise and remove it from the socket (see...