Removing
1. Remove the interior door handles, trim panel and plastic sealing film.
2. Remove window glass. Alternatively, the glass can be fixed in the raised position with wedges, having previously released the screws securing it to the power window slider.
3. On models with power windows, disconnect the controller electrical connector.
4. Give bolts of fastening of a regulator to the internal panel of a door. Remove the regulator assembly through the access hole in the inner door panel.
Installation
Installation is in the reverse order.
1. Lubricate the regulator with multipurpose grease before installation.
2. Adjust the position of the window pane.
3. Before reinstalling the polymer sealing film and the door trim panel, check the proper functioning of the lock and power window mechanisms.