Models Hardtop (Hardtop)
Removing
1. At the rear of the vehicle, fold back the rear seat cushion.
2. Raise the mat and give the seat hinge bolts located under it (see accompanying illustration).
3. Remove the seat from the car.
Installation
Installation is in the reverse order.
1. Lubricate the mounting bolts with sealant before installation.
2. Move the seat back, making sure that it is securely fixed in the seat locking mechanism.
Models Wagon (Station Wagon)
Backseat
Removing
1. Remove the head restraints from the back of the rear seat by pressing the release tab on one of the head restraint sliders.
2. In the rear of the passenger compartment, lift the seat cushion forward and release the bolts of the seat-to-floor brackets.
3. Give also bolts of fastening of arms of a seat to the back panel of a floor.
4. Remove the seat from the car.
Installation
Installation is in the reverse order.
Do not forget to pre-lubricate the mounting bolts with sealant.
Third seat
Removing
1. At the rear of the vehicle, fold the seat cushion forward.
2. Give bolts of loops of the third seat (see accompanying illustration).
1 - third seat
2 - bolts
3. Remove the seat from the passenger compartment.
Installation
Installation is in the reverse order.
1. Do not forget to pre-lubricate the mounting bolts with sealant.
2. Move the seat back, making sure that it is securely fixed in the seat locking mechanism.