2. Remove 6 bolts
3. Carefully remove the hub housing, ring, spring and driver A (blocking ring, photo).
2.3 Parts of the self-locking device
1. Hub locknut; 2. Lock washer; 3, 8. Spring ring; 4. Washer; 5. Leash B; 6. Washer A; 7. Washer B; 9. Leash A; 10. Spring; 11. O-ring; 12. Body; 13. Parts of the self-locking device
4. Remove retaining ring, washers and driver B (photo).
2.4 After removing the housing, remove the retaining ring, washers and driver B
1. Leash B; 2. Retaining ring; 3. Washer A
5. Check the thickness of the blocking rings A and B (photo). If the thickness is less than normal, then replace both rings.
2.5 Checking the thickness of the blocking rings L (must be at least 15.4 mm)
6. Assembly is carried out in the reverse order. Lubricate the indicated parts.