Front shock absorbers
1. Turn out the wheels, raise the front of the car.
2. Loosen stem nut, remove washer and bushing (photo).
4.2 Unscrewing the shock absorber rod nut
3. Turn away a nut and get a coupling bolt (photo).
4.3 Shock absorber pinch bolt
4. Installation is carried out in the reverse order. The head of the lower bolt must face forward in the direction of the vehicle.
Rear shock absorbers
5. Raise the rear of the vehicle by the axle beam and place it on a secure base.
6. Turn away a nut of the bottom fastening of the shock-absorber to an arm of the bridge (photo).
4.6 Nut of the lower fastening of the rear shock absorber
7. Turn away a nut of the top fastening of the shock-absorber and remove the shock-absorber (photo).
4.7 Nut of the upper mounting of the rear shock absorber
8. Establish shock-absorbers in a former order, finally tighten nuts after lowering of the car on wheels.