2. Rotate the latches that secure the outer door trim by 90°, lift up and remove the trim.
3. Remove the plastic water shield.
4. Remove the power window chute.
5. Turn away bolts of fastening of glass to a window regulator.
6. Move the glass up and remove.
7. If necessary, unscrew the bolts and remove the power window through the opening in the door frame (photo).
15.7 Parts of the door and power window
1. Door adjustment; 2. Adjusting the position of the door hinge; 3. Front chute adjustment; 4. Adjustment of the power window mechanism; 5. Adjusting the position of the glass on the power window; 6. Detent adjustment
8. Before assembly, lubricate the rubbing surfaces with a thin layer of lithol.
9. Installation is carried out in the reverse order. After installation, adjust the glass. To do this, align the glass first parallel to the upper chute, and then align it with the rear chute and tighten the bolts. Adjustment of the smooth running of the glass is provided by turning the front chute with the bolts loosened.