2. Relieve pressure in the supply system (see chapter Power and exhaust systems), then disconnect the negative cable from the battery.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
3. Release the filter from the mounting spring clamp and disconnect the intake and exhaust gas lines from it.
And — a Collar of fastening of a final fuel hose
B - Fuel filter assembly
C - Spring clamp
4. Pay attention to the marking of the connection points to the filter of the intake and exhaust gas lines. A correctly installed filter should be turned upside down with the outlet fitting.
5. Connect the intake and exhaust gas lines to the assembly, making sure that the fastening clamps are tightened securely. Connect the negative cable to the battery, start the engine and check the filter and fuel lines for signs of fuel leaks.