Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
2. Remove the direction indicator assembly seated in the panel of the corresponding wing (see chapter Onboard electrical equipment).
3. Turn out screws and release plastic clamps of fastening of a locker of protection of an arch of a wheel. Remove the locker along with the attached dirt baffle (mudguard).
4. Turn out bolts of fastening of the panel of a wing.
 |  |
 |  |
5. With the help of an assistant, remove the fender panel from the car - try not to damage the paintwork.
Note. After separating the panel, pull it back, removing it from the guide pins installed at the front edge and releasing the mounting bracket from the bumper pad mounting bracket.
6. Installation is carried out in the reverse order. When installing a new wing, transfer to it from the old panel the plastic lining of the lining of the arched opening (if any).
7. Track the reliability of tightening the threaded fasteners and snapping the clamps.