2. Place an assistant or equivalent weight in the driver's seat.
3. Install the headlight beam leveler (if present) to the zero position.
4. Turn on the dipped headlights.
5. Turn the adjusting screws to set the headlight beams to the desired position on the screen. First, fully tighten the adjusting screws. Adjust by turning them off gradually.
The axes of the light beams must be parallel to the longitudinal axis of the body and located under the points P (see picture).
The figure corresponds to left-hand drive vehicles. For right-hand drive cars, the light spots will be mirror-symmetrical.
The dotted lines indicate the geometric axes of the headlights.
- H: height of headlight centers
- W: headlight center distance
- L: 5 m
- C: 65 mm